TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

350 u hyralics

Welcome Guest, Log in or Register

Author

05-25-2005 15:46:43

Report to Moderator

i had an idea the other day. how hard would it be to put a hyrolic filter on my 350 u? i think i could add in a transmission filter like out of jegs, mabee in the return line. any thoughts, oppions, or comments? thanks

[Log in to Reply] [No Email]

05-30-2005 18:24:01

Report to Moderator

Re: 350 u hyralics in reply to jk, 05-25-2005 15:46:43

i didn't know about the screen thanks for the thoughts

[Log in to Reply] [No Email]

TDK

05-26-2005 19:39:01

Report to Moderator

Re: 350 u hyralics in reply to jk, 05-25-2005 15:46:43

If it's a 350(ser.#13095 & up) it should have the rubber hoses near the pump, making it pretty simple to plumb in a filter. If it has the hard lines from pump to reservoir then it's a little harder to do.

[Log in to Reply] [No Email]

Ibby

05-26-2005 02:33:20

Report to Moderator

Re: 350 u hyralics in reply to jk, 05-25-2005 15:46:43

If you have Power Steering, you can filter the return line from the steering box with a unit from TSC or other places. I put a pressure gauge on mine and change the filter when it hits 75psi.

There is also a very small filter INSIDE your safety/regulator/priority valve (power steering or not), that will mess everything up BAD if it plugs. Gotta remove the valve and the end cap to find it.

[Log in to Reply] [No Email]

r4etired

05-25-2005 18:26:38

Report to Moderator

Re: 350 u hyralics in reply to jk, 05-25-2005 15:46:43

Unless it has beem removed the tractor already has a filter on it, under the seat in the reservor, a fine screen, maybe 6in long 1-1/2in diameter it is the start of the suction line to the pump

[Log in to Reply] [No Email]

PAULIH300

05-25-2005 16:24:29

Report to Moderator

Re: 350 u hyralics in reply to jk, 05-25-2005 15:46:43

You would have to cut into the steel manifold piping,and basically "ruin" what isnt replaceable new.The tranny filter from Jegs/Summit is only around 5/16"-3/8" for the car tranny cooler lines.The Utes steel tubing is a lot larger than that.I really dont think its all that possible on a 300/330/350.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy