Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Super H Stuck in gear help

Welcome Guest, Log in or Register
Author 
Sighombre

05-19-2005 06:56:27




Report to Moderator

My Super H (SN# 9791) is stuck in 3rd gear. We tried getting it out of gear, but we had to take the transmission plate off. We replaced all 4 of the springs and the ball bearings on the forks that moves gears. We did not put the plate back on, but put the forks back in place and tried to shift it with the lever. 1 & R and 4 & 5 shift fine. It still will not shift out of 3rd. Could it be the wear on the shifting fork or the hole the ball bearing sits in? What could be the problem? Where can I get a new fork for 2nd/3rd gear if I need one? My local parts guy couldn't get them. Thanks!

[Log in to Reply]   [No Email]
Janicholson

05-19-2005 08:13:11




Report to Moderator
 Re: Super H Stuck in gear help in reply to Sighombre, 05-19-2005 06:56:27  
I believe it is unlikely that the balls/rails and springs are at fault here (I may be wrong). I would be sure that the drive train is not under load (tractor can be moved by hand, back and forth some). Next I would use two screw drivers to gently try to tease third gear out of engagement on the shaft. Be gentle and don't bend anything. If it is stuck, it may have to be dissassembled to free the gear.
LOL JimN

[Log in to Reply]  [No Email]
Sighombre

05-19-2005 09:44:57




Report to Moderator
 Re: Super H Stuck in gear help in reply to Janicholson, 05-19-2005 08:13:11  
We reassembled the transmission plate off of the tractor and it will not shift out of 3rd.



[Log in to Reply]  [No Email]
Little H

05-19-2005 07:46:50




Report to Moderator
 Re: Super H Stuck in gear help in reply to Sighombre, 05-19-2005 06:56:27  
sounds like the fork is bent. you should try a good salvage yard. while you are at i build the shifter back up or replace it as well.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy