Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

300 utility flywheel bolts

Welcome Guest, Log in or Register
Author 
Joe Kimbriel

04-18-2005 15:29:25




Report to Moderator

I'm in the process of rebuilding a 300 U with a C169 and noticed the clutch plate has been rubbing the flywheel bolts when released. The bolts are 1 and a 1/4 inches long and was installed with lock washers. One inch would have been perfect. If the lock washers are not installed, the bolts protrude through the wheel and crank and hit the seal housing. I have never seen flywheel bolts with lock washers, but I also never have worked on an old tractor. It seems to me that someone replaced these bolts with too long of ones and then needed spacers. Does anyone know what length the flywheel bolts should be and do they require lock washers?

Thanks,

Joe

[Log in to Reply]   [No Email]
El Toro

04-18-2005 19:30:15




Report to Moderator
 Re: 300 utility flywheel bolts in reply to Joe Kimbriel, 04-18-2005 15:29:25  
Hi Joe, Can you remove one of those bolts and measure the depth of the hole, then you can determine the length of the bolt you need? One that's 7/8" may be long enough> Hal



[Log in to Reply]  [No Email]
El Toro

04-18-2005 19:29:54




Report to Moderator
 Re: 300 utility flywheel bolts in reply to Joe Kimbriel, 04-18-2005 15:29:25  
Hi Joe, Can you remove one of those bolts and measure the depth of the hole, then you can determine the length of the bolt you need? One that's 7/8" may be long enough> Hal



[Log in to Reply]  [No Email]
PAULIH300

04-18-2005 15:35:50




Report to Moderator
 Re: 300 utility flywheel bolts in reply to Joe Kimbriel, 04-18-2005 15:29:25  
IH cataloging shows no washer,just 4 bolts #360868R1.



[Log in to Reply]  [No Email]
Joe Kimbriel

04-18-2005 15:42:23




Report to Moderator
 Re: 300 utility flywheel bolts in reply to PAULIH300, 04-18-2005 15:35:50  
Ok, makes since to me and thanks for the part number.

Thanks,

Joe



[Log in to Reply]  [No Email]
Joe Kimbriel

04-18-2005 15:57:29




Report to Moderator
 Re: 300 utility flywheel bolts in reply to Joe Kimbriel, 04-18-2005 15:42:23  
Paul

Can you or anyone recommend an exploded view manual and where to order it. This seems like this is a must have thing dealing with old tractors that have been worked on in the field.

Joe



[Log in to Reply]  [No Email]
PAULIH300

04-18-2005 16:09:28




Report to Moderator
 Re: 300 utility flywheel bolts in reply to Joe Kimbriel, 04-18-2005 15:57:29  
If you buy a parts book from binderbooks it will give you plenty of illustrations.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy