TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

IHC TD 9 crawler

Welcome Guest, Log in or Register

Author

Jerry Jacobson

03-28-2005 12:02:47

Report to Moderator

How is a dozer blade attached to the tractor, and where can I get parts to make this attachment? (I have tractor & blade, but they're unattached.)

[Log in to Reply] [No Email]

IHCarl66

03-29-2005 17:42:20

Report to Moderator

Re: IHC TD 9 crawler parts in reply to Jerry Jacobson, 03-28-2005 12:02:47

Try Clapp Bros. Westfield,ILL (217)967-5219 or Cook Equipt.Allegan,Mich. (616)673-5454 they both
advertise in Illinois Agri-news for IH dozer parts. Carl

[Log in to Reply] [No Email]

Jerry Jacobson

03-29-2005 21:36:35

Report to Moderator

Re: IHC TD 9 crawler parts in reply to IHCarl66, 03-29-2005 17:42:20

Thanks much, Carl. I phoned Clapp, & Doc there says he'll check around his spread to see if he has any of those parts lying around. I'll phone Cook tomorrow. Appreciate your help.--JJ

[Log in to Reply] [No Email]

IHCarl66

03-28-2005 18:00:28

Report to Moderator

Re: IHC TD 9 crawler in reply to Jerry Jacobson, 03-28-2005 12:02:47

Here is a picture of a Heil dozer blade on my TD9
Not a real good side view it's the only picture on file.This is a pretty elaborate set up to make
might check salvage yards for a used one.

[Log in to Reply] [No Email]

Jerry Jacobson

03-28-2005 20:03:11

Report to Moderator

Re: IHC TD 9 crawler in reply to IHCarl66, 03-28-2005 18:00:28

Thanks a lot, Carl--that's a terrific photo. Unfortunately my computer won't (or I don't know how) to print the whole picture--it keeps cutting off the right side, even when I use the portrait mode & move it as far as I can to the left. The attachment looks like a pretty elaborate set-up. I have a customer for my tractor & blade, but he wants 'em attached. Another e-mailer says a place in West Va. used to sell IHC parts years ago. I'll try to find 'em. Do you have any ideas where I can locate the attaachment arms & parts? Thanks again for the quick response & neat photo.--Jerry

[Log in to Reply] [No Email]

janicholson

03-28-2005 14:40:46

Report to Moderator

Re: IHC TD 9 crawler in reply to Jerry Jacobson, 03-28-2005 12:02:47

THe answer depends on who made the blade, and the vintage of both. The usual mount is on the track rail in front of the rear track sprocket. My recollection is a large casting with a pivot for the end of the blade push arm, and 3-4 bolts into the rail. If it is a hydro "U" blade it may be more complex. You might try to find illustrations on the net. LoL JimN

[Log in to Reply] [No Email]

Jerry Jacobson

03-28-2005 20:13:12

Report to Moderator

Re: IHC TD 9 crawler in reply to janicholson, 03-28-2005 14:40:46

Thanks a lot for the information, Jim. IHCarl66 (see the forum) sent me a fine photo showing how the blade is attached to his TD 9, which looks later than mine. I believe that my TD 9 may be in the series built between '42 and '56, but I don't know aboout the blade--I'll look for a mfr's mark on the blade. This looks like a pretty challenging project--I have a customer for tractor & blade, but he wants 'em attached. Thanks again--Jerry

[Log in to Reply] [No Email]

janicholson

03-28-2005 19:08:54

Report to Moderator

Re: IHC TD 9 crawler in reply to janicholson, 03-28-2005 14:40:46

JimN again I remember a company out of Wheeling West Virginia that was the ultimate source for IH yellow tracked used parts. However it was long ago.
LOL JimN

[Log in to Reply] [No Email]

Jerry Jacobson

03-28-2005 20:23:00

Report to Moderator

Re: IHC TD 9 crawler in reply to janicholson, 03-28-2005 19:08:54

Thanks again, Jim. I'll try to find that outfit in Wheeling. I'll let you know what I find out. This won't be an easy project!--Jerry

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy