Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

F200 front wheel bearing seal questions

Welcome Guest, Log in or Register
Author 
RT (seTX)

03-07-2005 10:31:52




Report to Moderator

The oil seals that came with my front wheel bearing kits (not from IH) for my 200 are not like the original parts. I know is this is not unusual, but the new seal fits onto the dust deflector, instead of directly onto the axle shaft. I’m fairly sure the old seal seated onto the axle shaft itself instead of the dust deflector. There is also no room for the felt washer with the new oil seal. The new oil seal fits so tight into the wear ring that the oil seal and dust deflector are turning with the wheel assembly. I think this will allow moisture into the hub and let grease out. The IH part numbers are 43463D for the oil seal and 55453D for the felt washer.

Am I correct in assuming the dust deflector should remain stationary and the movement should be between the outside of the seal and the wear ring? Is there any way, other than welding, to keep the dust deflector in place? Are the original type parts available or does anyone have part numbers from another source? Thanks in advance for your help

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy