Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

More history lessons on Regular

Welcome Guest, Log in or Register
Author 
Okla kansan

03-05-2005 17:12:41




Report to Moderator


Where was the ID plate put on a Regular, or did they have them? And what type mag would be on a 29? It has a Bosch on it now, but I never thought IHC used Bosch mags. I have tried to put them on a 20 and 30, but they wont fit, so the Regular setup must be made a bit lower than 20a or 30s. Why did they run a oil line into the govenor housing on a Regular, but not on a 20 or 30? Thanks again.

[Log in to Reply]   [No Email]
Nebraska Cowman

03-05-2005 17:47:13




Report to Moderator
 Re: More history lessons on Regular in reply to Okla kansan, 03-05-2005 17:12:41  
you ask funny questions but I won't laugh. The ID plate is in the same location as the F20, (on the backside of the toolbox. They quite often have fallen off. Bosch mags were used on some F20s and are isted in the parts book. Don't know about Regulars but the mounting is the same, you might have to change the coupler. Magnetos were standarized very early on. There is an oil line on the governor on the F-20 and F30 as well as the Regular. Piping may be a little differn't on later tracors with an oil filter. In fact I run into quite a few with a pipe into the side of the block. maybe they were trying to get extra oil to the camshaft?

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy