Woods mower mounting hardware

Thanks,

these are all the part numbers and there descriptions. i have the parts breakdown page for everything you need to bolt it up. there are some other pieces that are usualy already on the mower, but if they are gone you will need to buy them also.

if you want i can try to scan the 2 pages of my manual. 1 page has a drawing, and the other page has the part number and descriptions. believe me it makes it alot easier to mount this mower with the corect pieces. otherwise you will end up chewing up a 50.00 belt twice a year because of alignment problems with homemade brackets.

i can also give you the number to my local dealer who could order for you if you dont have a local dealer or your local dealer wants your first born for the parts.

my dealer is Abingdon Equipment Co.
Abingdon VA.

thanks
bryan meade

for the l306 to super a is 5711.

i dont recomend the true woods brand (to expensive)

a-pix makes them for about 30.00 cheaper.

there part numbers are a-4152 and a-5711.

a woods brand l306 belt cost me 85.00 and a pix brand cost me about 40.00. and they have lasted just as long as a woods belt did for me.

i get them from general ruber and plastics.
bristol Tn. 423-764-7126 i deal with Cameron. hes a Irish dude.

Some of these are quite easy to modify, but from a Kubota to a Super A, just spells trouble.

I actually do have the belt pulley shaft and the pulley for the mower with it. I have a belt although I am not sure it is the correct length. I think I have what I need, except the semi-hard mount between the tractor and the mower deck.