Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

HYDRO REGULATOR

Welcome Guest, Log in or Register
Author 
JOSSETTE

02-01-2005 14:46:11




Report to Moderator

HOW DO YOU ADJUST THE HYDRAULIC REGULATOR ON A 400




[Log in to Reply]   [No Email]
K.B.-826

02-01-2005 19:21:28




Report to Moderator
 Re: HYDRO REGULATOR in reply to JOSSETTE, 02-01-2005 14:46:11  
Take the regulator/saftey valve apart and stick a couple washers between the heavier spring and the guide it sits in. Don't get too carried away, The hydraulic systems on those tractors were not designed to stand up to more than about 1500 psi. I'm sure you know of a few being run at more than 2000, but they won't be reliable.



[Log in to Reply]  [No Email]
JOSSETTE

02-01-2005 19:30:28




Report to Moderator
 Re: HYDRO REGULATOR in reply to K.B.-826, 02-01-2005 19:21:28  
I AM LOOKING AT THE SLEEVE IT SITS IN. TRY TO FIND WASHERS THAT DO NOT COVER THE HOLES IN THE BOTTOM?? MORE THAN LIKELY. THANKS



[Log in to Reply]  [No Email]
K.B.-826

02-01-2005 19:42:17




Report to Moderator
 Re: HYDRO REGULATOR in reply to JOSSETTE, 02-01-2005 19:30:28  
Right.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy