Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

PAULIH300-Hyd. Problem

Welcome Guest, Log in or Register
Author 
TDK

01-30-2005 20:53:23




Report to Moderator

Paul, there should be only one hose plumbed from valve to the lift cyls. if they are single acting.Swap the hose to other outlet (where return is plumbed in), remove return hose running to reservoir and plug it at the valve.Make sure valve is set on single(S).You can swap the hoses on valves. Don't remember how yours is set up, but manual shows outer valve used with bucket, inner one with lift. Is the return hose plumbed in underneath the hyd. cyl. on left side ? There's a reservoir drain there but it's only a 1/4" pipe plug, just curious. If you would like a copy of my manual on the "U-34 Loader" send me an email. Let us know what you find!

[Log in to Reply]   [No Email]
CNKS

01-31-2005 19:39:07




Report to Moderator
 Re: PAULIH300-Hyd. Problem in reply to TDK, 01-30-2005 20:53:23  
TDK, I think you just summarized everything I said in two simple paragraphs, course I haven't seen a 300U in person -- if the return is attached as you thing it might be, why did the previous owner do that?



[Log in to Reply]  [No Email]
TDK

01-31-2005 22:15:49




Report to Moderator
 Re: PAULIH300-Hyd. Problem in reply to CNKS, 01-31-2005 19:39:07  
CNKS, I went back and found your post. It does sound like we're saying the same thing. It seems that the lift would work with hose attached to either outlet. Figured it won't hurt to swap the lines though. Have no idea why someone would install a return line from valve to reservoir. Could there be a problem inside valve ? They're relatively simple, maybe a hyd. passage plugged ? Who knows ? Maybe Paul will let us know how it goes !

[Log in to Reply]  [No Email]
PAULIH300

02-01-2005 09:29:20




Report to Moderator
 Re: PAULIH300-Hyd. Problem in reply to TDK, 01-31-2005 22:15:49  
....whenever I can get to it.....



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy