Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

M Puller

Welcome Guest, Log in or Register
Author 
Will Sick

01-24-2005 18:41:04




Report to Moderator

I'm helping a friend put together an M for pulling. We have a 264 block and a propane head. What would be the best pistons to use?




[Log in to Reply]   [No Email]
ChadS

01-25-2005 02:05:22




Report to Moderator
 Re: M Puller in reply to Will Sick, 01-24-2005 18:41:04  
Go with a set of Super M 4-1/8 pistons set which takes you out to 281 ci. with the right fuel, carb work 70-75 hp easily. the M, takes the large wrist pin, so the Super M piston set would be a good choice for the $$ Maybe throw in a 450 cam too, would help with torque in the lugging rpms. Good combo for not alot of $$. Most kits, have comformatic pistons, which are pretty good for making better compression VS the older piston sets . I do make pistons for these, that are higer compression yet,, but the LP head will put you at 200 psi, with the comformatic pistons. email is open if you need more info on carbs and such to use. Chads

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy