Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall H with grinding noise in the transmission

Welcome Guest, Log in or Register
Author 
Willi Homik

12-29-2004 11:55:37




Report to Moderator

Plowing with my Farmall H and started to hear a loud grinding noise. Stopped plowing. Drove it back to the barn. Made that grinding noise all the way there. Noise was in 1st, 2nd, and 3rd. May have been in 4th too, but I didn't try. Transmission functioned fine in 5th. Pulled the rear frame cover off. Looking to see if anyone out there may have any ideas.

Thanks in Advance.

Willi




[Log in to Reply]   [No Email]
captaink

12-29-2004 14:29:01




Report to Moderator
 Re: Farmall H with grinding noise in the transmiss in reply to Willi Homik, 12-29-2004 11:55:37  
I’d start by checking the bearing (pilot) on the front of the pinion (top) shaft and inside the input shaft of the transmission. It runs in every gear except in 5th. I’m betting you find your problem here.

If that bearing is good, I would check countershaft (lower shaft) bearings moving on to the rest in the rear end. I would also stick a magnet into the grease several places and check for pieces or filings that might give clues as to what is causing it. If you find metal, drain and flush the rear end and replace the grease.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy