Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Manifold torque specs ?

Welcome Guest, Log in or Register
Author 
Glen Thibodeaux

12-27-2004 18:58:11




Report to Moderator

I need the torque specs for the manifold on a Model 100, also what order should I tighten the bolts? Thanks for your time.
Glen




[Log in to Reply]   [No Email]
CNKS

12-28-2004 18:56:34




Report to Moderator
 Re: Manifold torque specs ? in reply to Glen Thibodeaux, 12-27-2004 18:58:11  
20 ft lbs as noted here:



[Log in to Reply]  [No Email]
Glen Thibodeaux

12-29-2004 17:26:46




Report to Moderator
 Re: Manifold torque specs ? in reply to CNKS, 12-28-2004 18:56:34  
Thanks for the link

Glen



[Log in to Reply]  [No Email]
Farmer Bob

12-27-2004 19:58:05




Report to Moderator
 Re: Manifold torque specs ? in reply to Glen Thibodeaux, 12-27-2004 18:58:11  
I don't think there is a written torque value but I'd say make sure the stud threads are clean, use the extension nuts (About twice the depth of regular nuts and some are made of brass) with the thick washers behind them. Snug each one up starting in the middle and work out towards each end alternating side to side. Then go back and give them about a quarter turn past snug. I usually put anti seize paste on the studs as well.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy