Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
Order Farmall Cub Parts Online

Pond Built with TD-18 and Cub

Welcome Guest, Log in or Register
Author 
Andy Martin

12-22-2004 06:35:04




Report to Moderator

Noticed the message yeaterday about Cub front blades.

I was building a pond with my TD-18 when I had to leave in a hurry and shut it down too quickly, severly cracking a head.

The pond was mostly finished, so I completed it before a rain with my Cub with front blade. A funny little dozer but it pushes loose dirt just fine. At one point I got a little side hill with it and had to climb on the right reat tire to keep it from rolling over to the left. Locking the right brake I got it back in gear and backed uphill to the left and got the tractor back on the ground. You don't have to remind me to keep the right side down.

Try that with a tipping TD-18!

[Log in to Reply]   [No Email]
Hugh MacKay

12-23-2004 04:13:59




Report to Moderator
 Re: Pond Built with TD-18 and Cub in reply to Andy Martin, 12-22-2004 06:35:04  
Andy. Sounds quite bizzar having a Cub for backup to an 18. Then most folks just don't realize just how good the little tractors are.

I do know a guy who experienced his weight making the difference with a dozer. Different make but about same size D-7. He had pushed out over a plaster pit, ground dropped from under him part way from front to back. Every time he tried to reverse machine would tip foreward. He tried getting off to go for help, same thing it needed his weight to stop it fron tipping foreward.

For those who don't know what a plaster pit is. In areas where there are gypsum deposits, it cant rot out. Usually the soil doesn't drop until disturbed by a machine. First time I ever saw one of these, I was disking with 1066. Noticed a hole about 2 feet across in my last pass. I got off tractor, walked over to investigate. Here was a hole in ground about 20' deep and funnel shape. (wider at bottom) This was on a farm I had just acquired, thus was new to me. I had never seen anything like this on my home farm. Later that day I related what I saw to my dad. He told me of one he saw about 3 acres in size and deep enough water had filled the bottom surface. The one my dad saw, they had threshed grain on the surface the day before. They had left with all equipment the night before and were returning to press (bale) the pile of straw. The straw was gone, except for a bit floating on water. These are quite dangerous. My friend with the dozer doesn't need convincing anymore. Farmer he was bulldozing for notice he wasn't moving. Came and hooked Farmall H on, this allowed him to reverse and back without tipping foreward.

[Log in to Reply]  [No Email]
Andy Martin

12-23-2004 05:46:39




Report to Moderator
 Re: Pond Built with TD-18 and Cub in reply to Hugh MacKay, 12-23-2004 04:13:59  
Whew!

Really good the guy noticed.



[Log in to Reply]  [No Email]
John *.?-!.* cub owner

12-22-2004 07:07:26




Report to Moderator
 Re: Pond Built with TD-18 and Cub in reply to Andy Martin, 12-22-2004 06:35:04  
Before I lost weight I might have been albe to hold the dozer down. HAHA! I've owned and worked cubs for several years. They have their limitations, but will do more than most people will give them credit for.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy