Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

A Super A Question

Welcome Guest, Log in or Register
Author 
Charles Houston

12-21-2004 18:26:00




Report to Moderator

The hydraulic rod that connects the touch control hydraulic arm to the rear lift assembly has a hugh rainbow curve in it instead of being straight. The lift arms on the rear of the tractor are grossly misaligned on the cross shaft. I think the left rear lift arm weld was broken loose on the shaft and welded back off location. How can I check this out and correct it the way it is supposed to be? All replys appreicated. Thank you.

[Log in to Reply]   [No Email]
Vern

12-21-2004 21:08:41




Report to Moderator
 Re: A Super A Question in reply to Charles Houston, 12-21-2004 18:26:00  
The rod to the rear should be straight. It has been used to exert down pressure which has caused it to bend.

The arms on the rockshaft should be aligned with each other. Perhaps they were re-positioned to fit a particular use.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy