Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

farmall 300 wide front end

Welcome Guest, Log in or Register
Author 
comradwade

12-13-2004 08:41:17




Report to Moderator

looking at buying a farmall 300, can it be converted to have a wide front end? if so what tractor will have a wide front end that will work on the farmall 300?




[Log in to Reply]   [No Email]
Red rider

12-13-2004 20:04:18




Report to Moderator
 Re: farmall 300 wide front end in reply to comradwade, 12-13-2004 08:41:17  
comradwade, actually the wide fronts all the way up to a 1206 will fit. The only difference will be the stay rod bracket for the M through the 1206 will be to wide. You will either have to make one or find the factory one which will cost you an arm & leg. I built a star rod bracket for my 300. Pretty simple. If you want I can post a picture of the bracket I built.



[Log in to Reply]  [No Email]
old

12-13-2004 11:13:40




Report to Moderator
 Re: farmall 300 wide front end in reply to comradwade, 12-13-2004 08:41:17  
Yes, but the cost will be around $500 for a good wide front end. I know of a place in Missouri that has a dozen or so of them.



[Log in to Reply]  [No Email]
Allan in NE

12-13-2004 09:34:45




Report to Moderator
 Re: farmall 300 wide front end in reply to comradwade, 12-13-2004 08:41:17  
Wade,

When I was a boy and depending on what tractor was busy doing what with the haying, cultivating and such, we used to have to swap those front ends around sometimes as many as 7 or 8 times a summer.

Having both narrow and wide row spacings meant sliding those rears in and out all the time too throughout the summer. :>)

Any front off of a 300 and/or lower (all the H series) will work on your tractor.

Allan

[Log in to Reply]  [No Email]
sammy the RED

12-13-2004 09:23:43




Report to Moderator
 Re: farmall 300 wide front end in reply to comradwade, 12-13-2004 08:41:17  
Yes, it can be switched.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy