TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Reply Sizing pistons and sleeves

Welcome Guest, Log in or Register

Author

Brian Robbins

12-04-2004 04:57:21

Report to Moderator

Sorry about the confusion before. My pistons measure 3 7/16 but I wrote it down under my block bore, that is 3 9/16. So if I get this right? All I need is to order the right size "piston and sleeve kit" and the sleeves will come to match? And going from the flat tops to the step heads, since I do have the gas head won't change anything. I keep getting asked the part number from my old pistons, which I have, but i don't want flat top pistons and I'm afraid if they use that number I won't get what I want.

[Log in to Reply] [No Email]

El Toro

12-04-2004 08:42:32

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Brian Robbins, 12-04-2004 04:57:21

Hi Brian, I called this company to verify that price. What they quoted on was for one piston and sleeve. A set costs $625.00. Sorry for the screw up. Hal

[Log in to Reply] [No Email]

El Toro

12-04-2004 07:59:13

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Brian Robbins, 12-04-2004 04:57:21

Hi Brian, Call this toll free number in PA for
a price on a sleeve and piston kit. 1-800-732-0017. I gave them the piston diameter of 3&7/16"
and they quoted a price of $155.00. This place
is an IH dealer and they have 2 dealerships in PA and 2 in Delaware. Ask for the farm equipment parts dept, they have garden tractors too. Hal

[Log in to Reply] [No Email]

Allan in NE

12-04-2004 05:34:49

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Brian Robbins, 12-04-2004 04:57:21

Brian,

You should be able to tell this guy that you have an engine with a standard 3 9/16" block bore and that you want a set of pop-up piston/sleeves to fit.

He sould forget about the diameter of the pistons for now, what you are really concerned about is marrying those sleeves to your block; that's the stickler. The pistons will fit the sleeve.

Or, maybe he is trying to cross-reference your old pistons to make sure that the block has not been overbored? Local parts house or over the phone?

Allan

[Log in to Reply] [No Email]

Brian Robbins

12-04-2004 05:45:55

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Allan in NE, 12-04-2004 05:34:49

Thanks Allen. It was at my local Tractor Supply. My local Case/IH dealer wanted well over six hundred for the parts, just pistons and sleeves. The guys they hire for these Tractor Supply stores can't do anything unless they can look up a part number to order from. But they can at least get the parts for less then 400. I have even thought of ordering them from this site, any thoughts or experiences.

[Log in to Reply] [No Email]

MagMan

12-04-2004 08:44:03

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Brian Robbins, 12-04-2004 05:45:55

Hi Brian I can sell you an in frame overhaul kit with pop ups for $350.00 plus shipping if you would like. JON

[Log in to Reply] [No Email]

Allan in NE

12-04-2004 06:26:58

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Brian Robbins, 12-04-2004 05:45:55

Hi agian,

I hear you there. I've really been thinkin' about trying this www.batescorp.com place next time. I need a fender and both left and right steps for my latest project.

Their prices seems almost too good to be true as compaired to other places for new parts. Wonder if they are pushing China produced stuff?

Allan

[Log in to Reply] [No Email]

12-04-2004 16:23:00

Report to Moderator

Re: Reply Sizing pistons and sleeves in reply to Allan in NE, 12-04-2004 06:26:58

Allan, about 2-3? years ago I found what I needed there for a SM at a reasonable price. Used engine part tho, not sheetmetal/steps.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy