Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

international 300 utility no oil going to the r

Welcome Guest, Log in or Register
Author 
byron

11-18-2004 10:13:29




Report to Moderator

I just bought a international 300 that has sat for 20 years because of an electrical fire and the guy never got it running I got it runnin in only 3 weeks but there is no oil pumping to the rocker arms the pump is good I checked it and there is plenty of oil pumping to the filter there is also a whole on the inside off the block it looks like a bypass whole to the oil pan it looks like it should have a plug threaded into is it shoul it or not

[Log in to Reply]   [No Email]
Allan in NE

11-18-2004 10:20:55




Report to Moderator
 Re: international 300 utility no oil going to t in reply to byron, 11-18-2004 10:13:29  
Byron,

What kind of pressure do you have?

I had a machine shop leave out a plug on a block one time. The engine would have oil pressure above an idle, but would drop to almost zero when at low speed.

I can't think of any "bypass" in an oil circut, other than at the filter dump. Does it look as though it could be a passage plug? Maybe it was a welsh plug that melted in the fire?

Allan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy