TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

400 hydraulics not working

Welcome Guest, Log in or Register

Author

David Wence

11-02-2004 17:57:46

Report to Moderator

I have just put on an International trip bucket loader on my Farmall 400. I hooked to hoses on the right side (belt pully) hydraulic block. The loader will not move up. How do I blead the air out of the lines? Also, I have 3 levers for the hydraulics, I do believe I am to use the one closes to the tractor and the third one farthest out is for the back hydraulics, what is the middle one for?

Thanks,

David

[Log in to Reply] [No Email]

Andy Martin

11-03-2004 06:46:07

Report to Moderator

Re: 400 hydraulics not working in reply to David Wence, 11-02-2004 17:57:46

You should not have to bleed the air out, but if you want you can crack a connection and let some out.

But, you may spill some hydraulic oil, which in some areas is considered a hazardous material so you may have to call the fire department to come and remediate the spill. Your homeowners' insurance may not cover the cost so it would be wise for you to take remediation training first, then curb the area in which you expect to discharge the hazardous material, warn the neighbors, don your protective suit, spread absorbant, and have paramedics stand by along with a safety watch with fire extinguisher. Should everything go as planned, be sure to dispose of the contaminated absorbant properly. This should include giving an advance copy of the MSDS for the hazardous material to those whom you expect to receive the waste. Should things not go as planned, just don't say I didn't warn you : )

[Log in to Reply] [No Email]

Harlen Larson

11-02-2004 18:23:31

Report to Moderator

Re: 400 hydraulics not working in reply to David Wence, 11-02-2004 17:57:46

The right side block is for the middle lever and there should also be a block on the left side that is controlled by the left lever. These hydraulic valves can be set for single acting or double acting by turning a knob about a quarter turn that sticks up off the front of each valve. I'm guessing yours is probably set to single acting so it only pumps one way and your hose is hooked to the wrong side. There should be two plugs on that block. I'm assuming you are just running one hose and your loader gravities down. Good Luck, David

[Log in to Reply] [No Email]

Red Green Man

11-02-2004 18:07:00

Report to Moderator

Re: 400 hydraulics not working in reply to David Wence, 11-02-2004 17:57:46

Middle lever should work hyd on front right side of tractor, right lever should work fast hitch.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy