TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

IH454 3pt hydraulics

Welcome Guest, Log in or Register

Author

Dan oebantam

10-31-2004 19:39:19

Report to Moderator

with draft lever in light raise/lower lever does not do anything to 3pt and using auger even with heavy draft and raise/lower lever down auger goes down really slow

[Log in to Reply] [No Email]

Ryan 560

11-01-2004 08:51:05

Report to Moderator

Re: IH454 3pt hydraulics in reply to Dan oebantam, 10-31-2004 19:39:19

We had the same problem with our 454. It was a piece of dirt in the valve.

[Log in to Reply] [No Email]

Allan in NE

10-31-2004 19:47:34

Report to Moderator

Re: IH454 3pt hydraulics in reply to Dan oebantam, 10-31-2004 19:39:19

Hi Dan,

Does your draft have a "run" position? If so, put the draft lever there to get that draft control clear out of the picture; it's messing you up.

A posthole digger sure isn't a 'draft' implement.

Hope this helps,

Allan

[Log in to Reply] [No Email]

dan (oebantam)

11-01-2004 07:09:39

Report to Moderator

Re: IH454 3pt hydraulics in reply to Allan in NE, 10-31-2004 19:47:34

Allen thanks for the response, the draft just has a heavy or light position. pulling the impliment raise or lower lever alone wont raise or lower it completly by its self

[Log in to Reply] [No Email]

Joe Bloggs

11-01-2004 19:24:10

Report to Moderator

Re: IH454 3pt hydraulics in reply to dan (oebantam), 11-01-2004 07:09:39

hello. first whats the weight of the auger. is it too light. check your valve body for dirt check the presure at the valve body on the return line first before you pull it all out.
how long have you had the 454 is this problem always existed ?

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy