TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Antifreeze in Oil - Farmall M - Update

Welcome Guest, Log in or Register

Author

RandyMcC

10-26-2004 16:27:51

Report to Moderator

Found the leak in the block. It is a pin hole leak above the camshaft about a half inch toward the center of the block from the valve tappet. Will JB Weld work on this? Would it be better than block or radiator sealant?

Randy

First Post:
Farmall M, which is a dry sleeve...just purchased, drained antifreeze down far enough to replace water header gasket (block about half full), pulled oil pan and replaced gasket, did not refill with antifreeze. One month later I again took the oil pan off to replace the petcocks and found quarter cup of antifreeze. I pulled the head to check headgasket. How do I know if I have a leaky headgasket?

From underneath the engine I found a drop of antifreeze on the block between cyl. 2 and 3 and on the cyl. 3 connecting rod bolts. The camshaft was clean. If a cracked block what are my choices? The tractor is used about 4 hours per month.

Randy

[Log in to Reply] [No Email]

Gene

10-26-2004 22:25:50

Report to Moderator

Re: Antifreeze in Oil - Farmall M - Update in reply to RandyMcC, 10-26-2004 16:27:51

Try the block sealent previously recommended.

Gene

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy