Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

IH 300 Utility Hydrualic Valve leaking???

Welcome Guest, Log in or Register
Author 
Scott Eakers

10-17-2004 19:30:05




Report to Moderator

The hydrualic lever on the valve is leaking. It leaks fron the shaft that the lever is attached to, It has a single lever that operates the fast hitch. Is it hard to replace or overhaul this valve block? Any suggestions would be greatly appreciated.




[Log in to Reply]   [No Email]
Unreserved dick

10-17-2004 20:34:31




Report to Moderator
 Re: IH 300 Utility Hydrualic Valve leaking??? in reply to Scott Eakers, 10-17-2004 19:30:05  
They're not too bad if you're comfortable working on mechanical stuff. Main thing with hydraulics is to be clean - get the exterior clean before starting.

The shaft you're describing seals with small o-rings (available at CaseIH). You should also plan on replacing the o-rings between the valve blocks, reservoir, and end plate (3 req'd for each seam), and you'll need a new gasket for the valve's front cover plate. Good luck.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy