hey allen!

Casey, the first thing is that you have to have a server on the net somewhere where you can upload and store your pictures (It doesn't matter where, either).

An example would be if you uploaded your pictures to the "Parts & Pieces" area of this site. Or maybe the "Tractor Photos" section.

You have to get the dudes up on the 'net first.

Then, after each picture is up there, RIGHT click on the picture and choose 'properties' by left clicking on the menu.

Highlight the URL string of that picture and then use this clipboard info to "paste" into the "Optional Image URL" box of your message.

Hope this makes sense,

Allan

After you get them loaded to the "tractor photos" like you've already done, then go back to the tractor photos section and open that picture up so that you can see it.

RIGHT click on the picture, you'll get a menu. LEFT click on 'properties' at the bottom of the menu. You then will get a page showing all the info of the picture.

Copy the "Address". Start with the "http://" thing and end with the ".jpg" thing.

Then, paste this into your URL address box in your messeage.

After you do that, sell me that 766!!!!!

Allan