Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

1940 H Govenor oil

Welcome Guest, Log in or Register
Author 
MAC in PA

10-13-2004 16:25:51




Report to Moderator

I have a 1940 H, is there an oil level for the govenor? when i open the cap i can't see an oil level. I'm using 30 weight non detergent for everything from engine to transmission and hydraulics. what oil weight should i use for the govenor. Thanks in advance MAC




[Log in to Reply]   [No Email]
riverbend

10-13-2004 19:04:48




Report to Moderator
 Re: 1940 H Govenor oil in reply to MAC in PA, 10-13-2004 16:25:51  
30W non-detergent oil is bad enough for the engine and hydraulics, but you should really be using 90W gear oil for the transmission and rear end. Even modern motor oil is not made to withstand shearing between gears.

New Operators and Service manuals are still available. One caution is to realize that oils have improved in the last 60 years.



[Log in to Reply]  [No Email]
MagMan

10-13-2004 18:16:47




Report to Moderator
 Re: 1940 H Govenor oil in reply to MAC in PA, 10-13-2004 16:25:51  
No the govener is feed by the engine oil you dont have to add anything there.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy