Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Oil Pump Rebuild - Parts?

Welcome Guest, Log in or Register
Author 
Slappy

10-12-2004 09:30:02




Report to Moderator

I am rebuilding my "44 H and hope to get it into "like new" condition. After opening up the oil pump, I found all the tolerances are to spec except the gear backlash (manual calls for 0.006 and I have 0.012 in. of clearance). I thought a new idler gear would bring it closer but IH dosen"t support any of the oil pump gears any longer. Does anyone know of a NOS source I might check?

Thanks




[Log in to Reply]   [No Email]
Bob Quale

10-12-2004 11:13:28




Report to Moderator
 Re: Oil Pump Rebuild - Parts? in reply to Slappy, 10-12-2004 09:30:02  
I just went through the same thing. I ended up buying a new pump for $200. If you go to the farmall H sight, there are some suppliers listed there that have pumps as well as parts. I found that the rod that drives the gears was worn at the bottom. Push the gear side ways, it should not move. The bottom plate also tends to wear. Hope that helps!

Bob



[Log in to Reply]  [No Email]
Slappy

10-12-2004 11:32:54




Report to Moderator
 Re: Oil Pump Rebuild - Parts? in reply to Bob Quale, 10-12-2004 11:13:28  
Thanks Bob,

Do you have web address? I tried the parts site here but didn't see any oil pump parts.



[Log in to Reply]  [No Email]
justin w.

10-12-2004 13:43:56




Report to Moderator
 Re: Oil Pump Rebuild - Parts? in reply to Slappy, 10-12-2004 11:32:54  
I have NOS pumps, and NOS shafts & gears for the pumps available. Email me for more info.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy