Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

560 crankshaft pulley?

Welcome Guest, Log in or Register
Author 
Farmall Daddy

10-10-2004 17:55:06




Report to Moderator

I am reassembling my '63, 263 cubic inch engine 560. Doing so, I ended up breaking a piece off of the crankshaft pulley. My question is, will a 560 diesel pulley fit on it? I measured the inside, and outside pulley radius' and they are the same. Thanks for any help!!




[Log in to Reply]   [No Email]
K.B.-826

10-10-2004 19:22:29




Report to Moderator
 Re: 560 crankshaft pulley? in reply to Farmall Daddy, 10-10-2004 17:55:06  
It should work great. According to the parts book, the C-263 engine in the 560 uses a pulley that is not a dampner. The D-282 in the 560 uses a pulley that is a dampner. The C-263 in the 660 uses the same part number pulley as the 560 Diesel. I also checked the parts book for the 706, and it's C-263 also uses the same pully as the 560 Diesel. The C-263 in the 560 uses the same part number crankshaft as the C-263 in the 706

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy