|
K.B.-826
10-09-2004 20:16:06
|
|
Re: 966 won't move in reply to Frank F, 10-09-2004 16:51:15
|
|
| |
Need to know a couple more things first. If your transmission oil pressure light works, is it on when the tractor dosen't move? Did your TA work in both ranges before, and does it make a difference what range you have the lever in now? How's your clutch pedal free travel? Any possibility the clutch is out? Making sure the Speed Transmission (1-2-3-4) is in gear, engine running, try to shift the Range Transmission (HI-LO-R) into gear with the clutch pedal up. If you can get it into gear, then the TA or clutch is at fault, normally it shoud grind like crazy. Fluid level, filter, any other steering or brake problems? Do you have the type of wheels that clamp to the axle, using two nuts on each side of the wheel to hold the clamp tight? It is very common for the nuts to break, causing the clamp to loosen, which allows the axle to spin in the wheel. However, I would think that you would notice that the wheel had moved in toward the platform if this was the problem. Just for the fun of it, start the tractor, put it in gear, and push the brake pedals one at a time. If the tractor moves with one pedal held down, that would indicate a problem in the final drive or loose wheel mounting hardware on the side for which you are holding the pedal
|
|
|
