Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Fan Belt Replacement for International 350 Utility

Welcome Guest, Log in or Register
Author 
BRed

08-29-2004 18:58:19




Report to Moderator

I have an 1957 International 350 utility. It needs a new fan belt. What is necessary to remove to replace this belt? There isn't much room in the front to replace the belt, and it doesn't seem to fit past the crankshaft pulley and the roll pin for the front axle. Also, how is the tension adjusted on this belt? Any help is appreciated. Thanks.




[Log in to Reply]   [No Email]
Duner Wi

08-30-2004 10:32:36




Report to Moderator
 Re: Fan Belt Replacement for International 350 Uti in reply to BRed, 08-29-2004 18:58:19  

I installed a new fan belt on a 350 utility once in the middle of the winter outside and what I remember is all that is necessary to remove to get the belt on is probably the hood. The biggest problem I had was the lock nut and screw/bolt in the adjustable pully. You need to screw the pully apart to make the groove the belt rides in wider or narrower to adjust the belt tension. You can break the pully if you get too severe with it.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy