Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

F-12 scicle bar mower

Welcome Guest, Log in or Register
Author 
Bill Copeland

08-09-2004 03:55:35




Report to Moderator

How is the universal joint attached to the gearbox? There is no set screw , no keyway.Could it be screwed on? If so is it left hand or right hand?
Thanks
Bill




[Log in to Reply]   [No Email]
Ralph T

08-09-2004 15:28:08




Report to Moderator
 Re: F-12 scicle bar mower in reply to Bill Copeland, 08-09-2004 03:55:35  
Unscrew the plug where you put the oil in the top of the gear box and rotate the shaft until a hole in the shaft lines up with the fill hole and drop a punch in there to jam it. Then unscrew the yoke ,it's lefthanded thread



[Log in to Reply]  [No Email]
jason(ma)

08-09-2004 04:46:09




Report to Moderator
 Re: F-12 scicle bar mower in reply to Bill Copeland, 08-09-2004 03:55:35  
I'll take a look at my parts book. I got one from bind er book. I myself am having trouble replacing the output bearing on the gear box. Haven't been able to figure out/learn how to get it apart.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy