TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Int. 350 U

Welcome Guest, Log in or Register

Author

Mark K.

08-07-2004 21:01:56

Report to Moderator

Hello,
I was wondering if there is a way to adjust the hyd. pressure my lift has no power? I have aux valve and used a gauge and it didn't make much pressure. With a implement on back it will lift about a inch then stop I go back to center try again and it will go another inch. It dosen't bleed off overnight, any thoughts?

[Log in to Reply] [No Email]

Ibby

08-08-2004 04:26:41

Report to Moderator

Re: Int. 350 U in reply to Mark K., 08-07-2004 21:01:56

Are these new problems, or something that's always been that way? Have you worked on that system lately? Are your filter screens clean? Does the pump squeal or the engine labor when trying to lift the load? Does it lift fully without a load on it? If so, check your relief valve. THe spring could be weak or broken. If not, I'd remove, clean and inspect everything. It's likely blocked or worn out somewhere.

[Log in to Reply] [No Email]

Mark K.

08-08-2004 13:47:17

Report to Moderator

Re: Int. 350 U in reply to Ibby, 08-08-2004 04:26:41

Is the relief valve about a 1 inch thick block that is in between the hand valve and the hyd reservoir? I saw no adjustment but I guess it could be a broken spring.

Are these new problems, or something that's always been that way?
I haven't had it long but it has been weak a while.

Have you worked on that system lately? Yes, cleaned filter (screen)

Does the pump squeal or the engine labor when trying to lift the load? Does it lift fully without a load on it? Pump dosen't squeel engine labors a little, Yes it will lift all the way. Thanks for the reply. Mark

[Log in to Reply] [No Email]

Ibby

08-09-2004 03:34:36

Report to Moderator

Re: Int. 350 U in reply to Mark K., 08-08-2004 13:47:17

HI Mark!

The safety/regulater block is indeed the one between the hydraulic valve and the side of the tractor. Clean everything REALLY well, and take it off, and remove the FRONT cover plate. THere will be a pencil like screen in there. If it"s plugged, it might cause your problems. I also suspect other problems, but we can get into them after you clean that screen. Let me know what you find, and we"ll go on from there. - Ibby

[Log in to Reply] [No Email]

Mark K.

08-11-2004 21:01:10

Report to Moderator

Re: Int. 350 U in reply to Ibby, 08-09-2004 03:34:36

Thank you,
I have been out of town but will check this weekend..
Mark

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy