Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Float setting on c Farmall zenith carb

Welcome Guest, Log in or Register
Author 
wildman

07-27-2004 19:46:44




Report to Moderator

Can anyone tell me what float setting is on a zenith carb on c Farmall thanks for any help in advance. Wildman




[Log in to Reply]   [No Email]
CNKS

07-28-2004 18:29:27




Report to Moderator
 Re: Float setting on c Farmall zenith carb in reply to wildman, 07-27-2004 19:46:44  
It will be about level at the factory spec of 1 5/32 inch from the top of the float to the gasket (upside down).



[Log in to Reply]  [No Email]
Moose

07-28-2004 09:31:38




Report to Moderator
 Re: Float setting on c Farmall zenith carb in reply to wildman, 07-27-2004 19:46:44  
If you can't find anything better, as I couldn't on my super c, set it so the float is level when closed. I did this with the carb off, and just turned the carb upside down and let the weight of the float close the valve. It worked great for me, and ever other setting I was told didn't.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy