TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

560 hyd pump swap

Welcome Guest, Log in or Register

Author

Chris Brown

07-24-2004 19:28:03

Report to Moderator

I have 2, 560's ,one a diesel and everything perfect and new (my work tractor) and the other a swapped out gas combine engine in a diesel tractor,everyhting worn out several times. It is my loader tractor,sad as it is. Being a loader tractor it has a worn out hydraulic pump,the manual shows several different pumps.I don't care what pump it has as long as it will lift hay bales and run the power steering,I'll be happy. Will any of the pumps listed fit,What I am asking is if I go to the junk yard and just get any old pump from a 560 will it fit mine? Mine has a cessna pump.

[Log in to Reply] [No Email]

Joe Evans

07-26-2004 06:56:31

Report to Moderator

Re: 560 hyd pump swap in reply to Chris Brown, 07-24-2004 19:28:03

Chris: from the information I've gleaned from the I&T manual for this series tractor, I don't recall any major stumbling blocks when swapping out pumps.

IH used both Cessna and Thompson as hydraulic pump suppliers for these tractors. I recently removed a shot Thompson and installed a rebuilt Cessna. The Cessna installed perfectly except for the pump drive gear: the key had to be shortened about 1/8".

Also, these tractors were equipped with 12 GPM pumps as standard with a 17 GPM pump as an option. There MAY be a problem with trying to install a 17 GPM pump in place of a 12 GPM and vice versa. I don't know how the the 17 GPM pump gets its rating--whether it simply is a larger pump and/or the pump is turned faster by way of different drive gear ratios. Check the S/N of your tractor. If I remember correctly, the S/N suffix for should end in "S-Y" for a tractor equipped with a 12 GPM pump.

The power steering pump piggy-backs on the hydraulic pump.

[Log in to Reply] [No Email]

Aces

07-25-2004 15:37:32

Report to Moderator

Re: 560 hyd pump swap in reply to Chris Brown, 07-24-2004 19:28:03

Chris the only difference I remember is the make and then if you have the planitary PTO or the later clutch type PTO the drive gear that drives the PTO and pump could be different beacuse of the PTO. I don't remember the mounting plate being different for the pump. If you go to junk yard how will you know you are getting a better pump.

[Log in to Reply] [No Email]

Chris Brown

07-26-2004 05:33:50

Report to Moderator

Re: Re: 560 hyd pump swap in reply to Aces, 07-25-2004 15:37:32

Just a shot in the dark. But I don't want to give the $300 for a new pump to go on a whipped old tractor. Look for a pump off a tractor that either had physical damage or fire,That at least says it was working .

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy