Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

IH wide fronts

Welcome Guest, Log in or Register
Author 
Jim A.

07-05-2004 18:25:03




Report to Moderator

How many of the older Farmalls will the front end found on 06, 26, and 56 series tractors fit? Seems like I've seen that style on M's or Super M's, and I'm sure I've seen it on 400, 450, and 560. Will that front end fit the smaller ones like the H, 300, 350, or 460? Dose it take any modification to make those wide fronts fit the older tractors? Also, I think the 1456 might have a bigger front end than other 06 or 56 series tractors. Is this true, and if so, would it fit say a 706?

[Log in to Reply]   [No Email]
Hugh MacKay

07-05-2004 19:14:14




Report to Moderator
 Re: IH wide fronts in reply to Jim A., 07-05-2004 18:25:03  
Jim: SM, SMTA, 400, 450, 560, all 06 and 56 are exactly same with two exceptions Length of center steering control arm, and width of brace that hooks to frame rails. There are different bearing sizes for various wheel over the years.

Quite sure you could add SH, 300, 350 and 460 to that buy adding one other minor exception, size as well as length of center steering control arm.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy