TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

504 wont start after head repalcement-HELP PLEASE!

Welcome Guest, Log in or Register

Author

Randy

06-22-2004 12:53:54

Report to Moderator

just replaced the head on my 504 gas it was cracked and had 2 bad valves.So found good used head put new guides,all valves, ground seats.torqued to 88lbs new head set new water pump themostat,hoses etc.It had run before the head replacement with the carb I rebuilt and put on it
At first I would get a nasty backfire,still wouldnt run,reset valve clearance-rechecked about 6 times,not even any smoke now,plugs are firing,carb is getting gas-still wont start what am I missing??
ANY HELP WOULD BE APPRECIATED-THANKS IN ADVANCE
RANDY

[Log in to Reply] [No Email]

Jon

06-22-2004 14:26:39

Report to Moderator

Re: 504 wont start after head repalcement-HELP PLE in reply to Randy, 06-22-2004 12:53:54

If you did not have the distributor off I would say you have the wires screwed up. sound like the timing or spark plug wires to me. JON

[Log in to Reply] [No Email]

TomH

06-22-2004 16:14:43

Report to Moderator

Re: Re: 504 wont start after head repalcement-HELP in reply to Jon, 06-22-2004 14:26:39

Yup. Backfiring is a sign the wires are wrong or it's waaaay out of time.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy