Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

MW 4-1/4 Pistons for 450

Welcome Guest, Log in or Register
Author 
Wayne

06-20-2004 07:45:29




Report to Moderator

My dad and I are thinking about rebuilding a tractor for tractor pulling. We want to get the most HP of course, so we are looking at piston & sleeve options. I know about Denny's sets, and from all the experiences that I have heard regarding that company, I won't even consider their product. I have read that M&W made a 4.250" piston and sleeve kit for the 450 that required the sleeve pilot bore to be altered to accept the new sleeves & pistons. Does anyone have any idea of how monumental of a task it would be to find a set? Also what is the going rate for a set of these pistons & sleeves if a set is located? I appreciate the help.. I honestly doubt I will be able to locate a set of these pistons and sleeves, but figured this was the place to ask...

[Log in to Reply]   [No Email]
El Toro

06-21-2004 13:55:34




Report to Moderator
 Re: MW 4-1/4 Pistons for 450 in reply to Wayne, 06-20-2004 07:45:29  
Hi Wayne, If you want to find out technical info
on sleeves and pistons. Federal-Mogul has a toll free technical phone number. It is 1-800-325-8886
and they'll give the info over the phone. I called them about a Super M and you can bump the
bore up from 4.0 to 4.125". Engine block has to bored oversize. Hal



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy