Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

560 hydraulic control

Welcome Guest, Log in or Register
Author 
greg

05-21-2004 15:37:09




Report to Moderator

I bought a 560 d a while back that was missing the hyd. cylindar on the fast hitch. I found one and put it on the tractor. Now I can't understand how to get the control lever to work it properly. It has two levers on the right side of the dash. The inside lever seems to work the remote cyl. and is working good. The outside lever seems to work the ram for the fast hitch along with some kind of rod that runs along the left side of the floor to the rear of the tractor,it is not hooked to any thing on the rear, but goes to a linkage to the control valve.If I move this rod back and forth the ram will go up and down I can hold it in a certain place and the hand lever on the dash will work the ram but it doesn't want to stay in hold position it either tries to go up or down. Thanks for any help.

[Log in to Reply]   [No Email]
Greg

05-21-2004 21:21:54




Report to Moderator
 Re: 560 hydraulic control in reply to greg, 05-21-2004 15:37:09  
I bought an operators manual and it shows nothing pertaining to the info that I need. That is about the the norm.



[Log in to Reply]  [No Email]
williamf

05-22-2004 07:50:10




Report to Moderator
 Re: Re: 560 hydraulic control in reply to Greg, 05-21-2004 21:21:54  
Yeah, they write the operator's manuals as if the most the operator will ever do is change the oil, maybe. That way if you want to fix something they can sell you a service manual, too. Still cheaper than taking it to the dealer, though.
Wm



[Log in to Reply]  [No Email]
Aces

05-21-2004 19:27:31




Report to Moderator
 Re: 560 hydraulic control in reply to greg, 05-21-2004 15:37:09  
Greg that linkage should attach to the rock shaft on fast hitch as the hitch moves the linkage returns the valve to center to stop the hitch from moving, with out the linkage the system will stay on what we call high pressure. You will have to look at a book to see what all is missing.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy