Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

TDC marking on Super C

Welcome Guest, Log in or Register
Author 
Michael

05-02-2004 10:18:38




Report to Moderator

I went to install a mag on my SC I read the manual I never could find the TDC marking on the flywheel. I did however get the the mag time just by felling the pistion with a screwdriver. Does anybody know where to find them just so I can know.




[Log in to Reply]   [No Email]
CNKS

05-02-2004 18:14:07




Report to Moderator
 Re: TDC marking on Super C in reply to Michael, 05-02-2004 10:18:38  
The TDC mark is there. You have to clean the surface of the flywheel, prop yourself up under the tractor, use a screwdriver to move the flywheel a little at a time. It is a VERY thin and shallow mark and may not have the DC/I-4 that is in your operators manual.



[Log in to Reply]  [No Email]
riverbend

05-02-2004 19:48:20




Report to Moderator
 Re: Re: TDC marking on Super C in reply to CNKS, 05-02-2004 18:14:07  
Very true. I had to find TDC on #1 and then look for the mark. It was there.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy