Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Fixed 826 Hyd. I just want to say Thank You

Welcome Guest, Log in or Register
Author 
Jeff OH

04-22-2004 05:23:54




Report to Moderator

But i don't know who i should be thanking, I have an 826 with loader and its connected to the tractor remotes, last weekend i lost nearly all lifting power so i check fluid and change filter, no help. Steering and brakes TA, worked fine. I was all set to pull the pump yesterday to check for sheared key or blown o-ring when i remembered reading on here about if the 3 pt hitch lever is all the way down it can cause problems. Sure enough that was it, once again Thank You very much, saved me alot of time and frustration I'd have been looking for a problem that didn't exist.

[Log in to Reply]   [No Email]
Aces

04-22-2004 08:21:36




Report to Moderator
 Re: Fixed 826 Hyd. I just want to say Thank You in reply to Jeff OH, 04-22-2004 05:23:54  
Jeff if the lever is down into the offset it can dump all the hydraulic oil if all the way down. The reason for this is to slow the hitch if one is pulling a very hard load the the hitch and using the draft control, it can be used for oter thinks as well.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy