Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

How much can a #8060 head be milled ???

Welcome Guest, Log in or Register
Author 
nightstalker

04-14-2004 17:22:27




Report to Moderator

Hi,
Would like to know if I can mill about a 100/1000ths off of a #8060 head for a Farmall M, and not run into any problems.

This is a working tractor, It will be used daily pulling plows, disk, loader work and such.

Instaling new sleeves and 4" pistons, "pop-up",
"firecraters" or whatever you choose to call them.

Just trying to get a little more HP out of it without causing any damage to a decent machine.

Thanks for any help
nightstalker

[Log in to Reply]   [No Email]
jim in ny

04-15-2004 16:48:36




Report to Moderator
 Re: How much can a #8060 head be milled ??? in reply to nightstalker, 04-14-2004 17:22:27  
you can take that much off but you will probably have to run at least hi test in it maybe race fuel . that can get expensive in a hurry for a workin tractor!



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy