Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

1206 fuel filter conversion

Welcome Guest, Log in or Register
Author 
Rich

04-13-2004 07:16:20




Report to Moderator

I am in the process of fixing and updating my 1206. (after 13000 hrs it deserves it) Has anyone ever put spin-on type fuel and oil filters on one? How did you do it?




[Log in to Reply]   [No Email]
ihdoug

04-13-2004 19:51:07




Report to Moderator
 Re: 1206 fuel filter conversion in reply to Rich, 04-13-2004 07:16:20  
I actually converted mine to spin on filters last week. I used a DT414 parts off a 915 Combine, Made a bracket out of some scrap steel, painted it up and run hoses. Had to run through the filter further from fuel tank first, then back to the closer one, as the Secondary filter was closer. (filters were on other side of motor on The combine) Should make changing filters alot more convinent. A setup from a 56 series would probably fit with no conversion. E-mail me if you want to.

[Log in to Reply]  [No Email]
RB

04-13-2004 12:50:16




Report to Moderator
 Re: 1206 fuel filter conversion in reply to Rich, 04-13-2004 07:16:20  
Use 56 series parts



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy