Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

M bolts

Welcome Guest, Log in or Register
Author 
Brad in WA

04-11-2004 20:47:55




Report to Moderator

What size bolts hold the nose cone on? 2 in front, 2 on each side? Thanks




[Log in to Reply]   [No Email]
Paul in Mich

04-12-2004 06:58:09




Report to Moderator
 Re: M bolts in reply to Brad in WA, 04-11-2004 20:47:55  
Brad, If you are referring to the grill section, it is held in place by two bolts on each side of the grill. The two holes in front are for stablizer rods for cultivators and other mounted equipment.



[Log in to Reply]  [No Email]
Jed

04-12-2004 06:31:33




Report to Moderator
 Re: M bolts in reply to Brad in WA, 04-11-2004 20:47:55  
I am not sure , but they are fine threaded.



[Log in to Reply]  [No Email]
Randy in NE

04-12-2004 04:46:48




Report to Moderator
 Re: M bolts in reply to Brad in WA, 04-11-2004 20:47:55  
I guess I will ask the question. What do you mean by the "nose cone"? I grew up around tractors and don't recall anything being referred to as a nose cone.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy