Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

farmall engine gasket question

Welcome Guest, Log in or Register
Author 
SCOTT IN MO

04-11-2004 07:20:42




Report to Moderator

Just got my engine gasket set for my H. What my question is there are 2 front engine cover gaskets , are both used or just one used. and also in the gasket set there are 2 rubber plugs
do these replace the 2 felt plugs that were in the holes where the rear plate goes by the back rear main seal. THANKS FOR ANY HELP




[Log in to Reply]   [No Email]
CNKS

04-11-2004 12:35:03




Report to Moderator
 Re: farmall engine gasket question in reply to SCOTT IN MO, 04-11-2004 07:20:42  
When I did the rear seal on my Super H, the IH plugs were felt, which replaced the rubber ones. In either case, be sure the plugs/gasket/plate is sealed good around the plugs, otherwise it will leak.



[Log in to Reply]  [No Email]
Mike ISW

04-11-2004 08:12:17




Report to Moderator
 Re: farmall engine gasket question in reply to SCOTT IN MO, 04-11-2004 07:20:42  
If you line up those frt cover gaskets they are not the same. Use the 1 that fits your frt cover bolt pattern. I had the same thing with my "H". You only need 1. The covers changed a bit during production. HTH, Mike



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy