Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

130 hyd valve

Welcome Guest, Log in or Register
Author 
g man

04-05-2004 04:15:13




Report to Moderator

looking fora hyd handle for the remote hyd's on my 130.
it is a handle with a big curve to it
any help appreciated




[Log in to Reply]   [No Email]
Hugh MacKay

04-05-2004 07:18:32




Report to Moderator
 Re: 130 hyd valve in reply to g man, 04-05-2004 04:15:13  
g man: I have been looking for one of those for close to 30 years. Problem is the actual valve is same on SC and 200 for the fast hitch and that is where many came from. I understand the Saginaw Hitch make a subsititute for that valve. They may just try them and see if they make the same for the 130. They may even make the lever. If that doesn't work, my thoughts is it will be like looking for a needle in a haystack.

[Log in to Reply]  [No Email]
CNKS

04-05-2004 17:59:57




Report to Moderator
 Re: Re: 130 hyd valve in reply to Hugh MacKay, 04-05-2004 07:18:32  
Saginaw's valve is a simply a spool valve that can be found about anywhere. Problem is, you have to put up with hyd hoses all over the place, that's ok unless you want it original. The original remote setup on the C/SC (I assume also on the Super A, but mine doesn't have it) is a much cleaner installation.



[Log in to Reply]  [No Email]
Hugh MacKay

04-05-2004 19:44:42




Report to Moderator
 Re: Re: Re: 130 hyd valve in reply to CNKS, 04-05-2004 17:59:57  
CNKS: I know about the factory valve. The one I have came from a 200, so the control lever is different from the 130 lever. The levers for the offsets mounted just above the throttle lever on the post going to steering shaft.

I did however read here on YT forums that Saginaw was now producing a reproduction of the original. Not many of those valves were ever put on the offsets so his chances of finding a factory original 130 lever is almost nil. I thought it was a good shot in the dark anyhow.

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy