Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

IH1486,Engine 436 valves calibration

Welcome Guest, Log in or Register
Author 
Francisco

03-23-2004 17:54:27




Report to Moderator

I would be very grateful if someone could let me know valve gap (exaust and admission or intake) for engine 436 in my IH 1486. I have been told it should be 20 for admi and 25 for exaust.
The calibration order should it be following the firing order? Thanks.




[Log in to Reply]   [No Email]
E J

03-23-2004 18:41:03




Report to Moderator
 Re: IH1486,Engine 436 valves calibration in reply to Francisco, 03-23-2004 17:54:27  
436cid engine warm .20intake .25exhaust



[Log in to Reply]  [No Email]
RAS

03-26-2004 11:37:34




Report to Moderator
 Re: Re: IH1486,Engine 436 valves calibration in reply to E J, 03-23-2004 18:41:03  
If it has ever had the cam replaced it should be set 25 & 25 just like the B engine. To set the valves set it on #1 tdc and adjust 1,2,3,6,7,10 then go to #6 tdc and do 4,5,8.9,11,12. This is counting the rockers from the front to the back.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy