Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

carb leaking

Welcome Guest, Log in or Register
Author 
Rich

03-09-2004 05:56:42




Report to Moderator

Put a new needle & seat in this 560,got the parts from Case-IH,and was leaking right away,reset float level and no change. Float is not sticking and does not have gas in it. Case-IH parts man told me that there has been alot of complaints recently regarding these parts. Do any of you have a quick cure other than shutting fuel off after each use? Thanks




[Log in to Reply]   [No Email]
rebuilder

03-09-2004 09:06:46




Report to Moderator
 Re: carb leaking in reply to Rich, 03-09-2004 05:56:42  
Rich;

I rebuild alot of farmall/I.H. carbs and the leaks are my #1 problem with both aftermarket & oem valves. 90% of these leaks can be solved by bending down the float and making sure there is absolutely no dirt in the valve to hold it open. Good luck.



[Log in to Reply]  [No Email]
Allen Bishop

03-09-2004 22:22:32




Report to Moderator
 Re: Re: carb leaking in reply to rebuilder, 03-09-2004 09:06:46  
Just had the same thing with an M. Bend the little flap on the backside of the needle valve down so it doesn't let the float go down much more than a 1/2 inch, and it won't overfill the bowl.



[Log in to Reply]  [No Email]
riverrat

03-09-2004 06:14:55




Report to Moderator
 Re: carb leaking in reply to Rich, 03-09-2004 05:56:42  
Sorry, I have no experience with these machines. However, I'd try another supplier/manufacturer. These are pretty cheap parts for an H so I'm guessing they're not bad for your 560.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy