Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

544 Farmall Loader Hydraulics

Welcome Guest, Log in or Register
Author 
Stan Skowronek

02-29-2004 15:18:17




Report to Moderator

I just mounted up a 2350 loader on my 544. The loader was run from the remotes, originally. However, I only have one remote. I do have a Prince loader valve w/ a relief. Where should I tap in to so the unloading valve works right? Or should I pop for another remote set up? I already own the loader valve. Any opinions would be helpful. I called one used parts dealer for a price on an inner remote, he must have thought I needed the gold plated one. Thanks, Stan S.

[Log in to Reply]   [No Email]
bill

02-29-2004 18:51:11




Report to Moderator
 Re: 544 Farmall Loader Hydraulics in reply to Stan Skowronek, 02-29-2004 15:18:17  
i run a 2250 loader on my 656 from 1 remote. go from the pressure side of your 544 remote (top outlet) to the "in" port on the prince valve, and go from the "out" port back to the bottom outlet on the 544. you'll have to lock the hyd handle back to make the prince valve work. downside is you have to unhook the loader to use remote on a pulled implement. i keep the engine speed to half throttle with the handle locked back to avoid too much pressure in loader valve circuit.

[Log in to Reply]  [No Email]
Mac

02-29-2004 16:36:15




Report to Moderator
 Re: 544 Farmall Loader Hydraulics in reply to Stan Skowronek, 02-29-2004 15:18:17  
If I understand correct you're talking of 2 seperate valves, 1 for lift and other for bucket . The best way to go would be a two spool valve using the one remote you have. I was quoted $1300 for rebuilt remote for my tractor(platinum model?). I think Prince has 2 spool with float for $150 or so. Or for the ultimate in loader performance (super fast)is a front pump (23gpm @ 220rpm on mine)that you can run any number of things from with flow dividers or selector valves (PrinceDirect $30-$40)

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy