Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

1086 cu in

Welcome Guest, Log in or Register
Author 
Sponz

02-25-2004 19:40:46




Report to Moderator

I know that a 1466 and a 1086 both turn 125hp stock. but i didnt know if they both had a 466 cu in.




[Log in to Reply]   [No Email]
farmerbill

02-25-2004 19:55:29




Report to Moderator
 Re: 1086 cu in in reply to Sponz, 02-25-2004 19:40:46  
as a matter of fact niether on had the 466 motor. 1086 was 414ci and the 1466 was a 436ci. The 1466 was rated at 145pto hp and the 1086 was rated at 131 pto.



[Log in to Reply]  [No Email]
bermuda ken

02-25-2004 19:53:03




Report to Moderator
 Re: 1086 cu in in reply to Sponz, 02-25-2004 19:40:46  
Neither were factory stock with a 466. The 1466 had a DT-436 and the 1086 had a DT-414 engine.



[Log in to Reply]  [No Email]
Mark

02-26-2004 09:10:46




Report to Moderator
 Re: Re: 1086 cu in in reply to bermuda ken, 02-25-2004 19:53:03  
I think I had a DT 466 in a '80something Int'l 25k lb bobtail truck. I think it was rated at 235 hp in the truck..... ...not in a tractor. Good engine.
Mark



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy