Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Farmall C Oil Pressure ?

Welcome Guest, Log in or Register
Author 
Gary_N_WV

02-24-2004 19:09:56




Report to Moderator

My operators manual says a reading of 1/2 scale is normal on the original gauge.
In the Value Wilt catalog is says a gauge like the original is 0-45 psi.
So...I think ....1/2 of 45 equals 22.5 pounds which seems a little low but who am I to think.May be that would be a correct pressure off the side of the oil filter canister.
I bought a regular type gauge that reads 0 to 30 PSI thinking that it would read somewhere in the mid portion of the scale. I was taught many years ago in electronics school to pick gauges-meters for a center scale reading.
When I started the engine it pegged the gauge and stayed there even after the engine and oil was warmed up.
So my question is what is the normal oil pressure in PSI suppose to be for a Farmall C so that I can select a gauge for a mid scale reading?
I don't want a gauge that I have to get down off the seat to see if the gauge has moved off of zero.

Thanks !
Gary

[Log in to Reply]   [No Email]
Randy in NE

02-24-2004 19:36:35




Report to Moderator
 Re: Farmall C Oil Pressure ? in reply to Gary_N_WV, 02-24-2004 19:09:56  
I haven't seen my C's since last October but if I remember right the guage goes up to 75 lbs. Mine will run about 60 lbs when it is cold and then drop off a little, never getting lower than about 45 lbs.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy