Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Filters for 1973 International 1066

Welcome Guest, Log in or Register
Author 
Frank

02-08-2004 14:34:25




Report to Moderator

I am wondering what filters are on the 1066 and what the nubers are for which filters. also i would like to know how to run the three point hitch which levers do what and as you are sitting in the tractor there is a large lever on the left hand side of the steering wheel, what exactly does that do?




[Log in to Reply]   [No Email]
Hayshaker5

02-09-2004 04:20:36




Report to Moderator
 Re: Filters for 1973 International 1066 in reply to Frank, 02-08-2004 14:34:25  
The lever to the left is your Torque Amplifier, Foward for direct Back for "TA". The first Lever on the quadrant to the right of the seat operates the 3 point, The next lever sets the draft control and the speed of lift for the 3 point. Next you may have 1 or 2 long levers which operate remote cylinders. There are a lot of sources for Operator Manuals on the ytmag site and are still available at your local Case IH dealer. Hope this helps.

[Log in to Reply]  [No Email]
Randy in NE

02-09-2004 04:12:42




Report to Moderator
 Re: Filters for 1973 International 1066 in reply to Frank, 02-08-2004 14:34:25  
The large lever to the left of the steering wheel is your torque. Forward is the normal position. Back is torqued. It is best is you shift it faster than slower. You should have a couple of levers to the right of the seat. You will have one for each set of remote hydraulics and one for the 3-point hitch. The 3-point will probably have an adjustment setting for setting the depth for the draft control.

[Log in to Reply]  [No Email]
Bermuda Ken

02-08-2004 15:28:15




Report to Moderator
 Re: Filters for 1973 International 1066 in reply to Frank, 02-08-2004 14:34:25  
Here's a quick listing....

A184773..... Primary Fuel
A184774..... Final Fuel
A184775..... Oil Filter (2 used)
A77544..... ..Coolant Conditioner Filter
528493R3..... Hydraulic Filter

Air Filter.....IH used at least 2 different vendors for this (Air Maize and Donaldson) so you need the number off the old filter to get the correct new one.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy