Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

rocker assembly 300 or 350

Welcome Guest, Log in or Register
Author 
Digger

01-22-2004 16:54:54




Report to Moderator

I just found out that my head off my H has to cracks it for the machine shop there on the intake valves and he said unfixable. I dont have water in my oil so not sure what to do there. One thing is to get a new rebulit head but the 8043 rebulit heads cost as much as an 300 or 350 LP head so if i cant use my head I was thinking that the sould go ahead and put on the head that will give me more power, but I dont have any rockers for a 300 or a 350 were does one get new rocker assemblys or rebulit ones from?

[Log in to Reply]   [No Email]
gauger

01-23-2004 04:50:40




Report to Moderator
 Re: rocker assembly 300 or 350 in reply to Digger, 01-22-2004 16:54:54  
I have a 8043 head with valves ground you can have for $75 plus shipping



[Log in to Reply]  [No Email]
randy hall

01-22-2004 20:30:00




Report to Moderator
 Re: rocker assembly 300 or 350 in reply to Digger, 01-22-2004 16:54:54  
the rocker arm assemblies will interchange.



[Log in to Reply]  [No Email]
Nebraska Cowman

01-22-2004 17:25:55




Report to Moderator
 Re: rocker assembly 300 or 350 in reply to Digger, 01-22-2004 16:54:54  
if you can't see the cracks with the naked eye I'd probibly put it on and run it.



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy