TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

Making parts

Welcome Guest, Log in or Register

Author

Chris

01-22-2004 10:11:18

Report to Moderator

Well the 460 utility project. 1. Steering box is rebuilt even though half the gaskets I purchased weren't the right ones ( made gaskets..then coated them with copper coat spray from permatex hint let it dry for 24 hrs before assembly).
2. Currently, I am making new tie rods with new aftermarket ends.
3. Next I am making an air filter assembly.
4. Rewired whole unit and replace coil with one that has an internal resistor. maybe I'll put an elctronic ignition on it.
5.Can't find a tachometer so I amm looking into an electronic one with hour meter..Hope I can find one that fits. I am looking for function not restoration.

Then I can start working on the stuff that I noticed when I bought the tractor. Oh well..Ya know it takes me back to when I was farming with IH's loved them...still love em!!

[Log in to Reply] [No Email]

01-28-2004 20:01:16

Report to Moderator

Re: Making parts in reply to Chris, 01-22-2004 10:11:18

I have a complete 2 point off a 460 U and a complete oil bath cleaner assembly 410-463-1897

[Log in to Reply] [No Email]

jeff

01-22-2004 16:52:14

Report to Moderator

Re: Making parts in reply to Chris, 01-22-2004 10:11:18

Chris, I have some 460U sheetmetal if you need something. 317-216-8269

[Log in to Reply] [No Email]

Chris

01-23-2004 06:11:10

Report to Moderator

Re: Re: Making parts in reply to jeff, 01-22-2004 16:52:14

What ya got? I nedd the white surround pieces for under the dash if you have them. I really wanted a front clip but I ready painted the one I had so...Ah heck just let me know what you have...I know this tractor is going to be torn down again and I will probably redo it so it would be nice to have extras

[Log in to Reply] [No Email]

ryan

01-22-2004 10:32:50

Report to Moderator

Re: Making parts in reply to Chris, 01-22-2004 10:11:18

if the tachs are like the ones on the row crops val-u-bilt tractor parts have rebuilt ones for 99.99 phone # is 1 888 828 3276

[Log in to Reply] [No Email]

Chris

01-22-2004 10:56:50

Report to Moderator

Re: Re: Making parts in reply to ryan , 01-22-2004 10:32:50

Thanks...I will give them a call...I think the speed might be off but I ain't racing it....just working..rpms and hrs is all I need.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy